|
Garden and Mini Rod Tractor Pulling
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ |
|
~~~~~~~~~~~~ ~~~~~~~~~~~~ LSGTPA is Sponsored by ~~~~~ Ed Smith Farm ~~~~~ Bonham Service Center ~~~~~ Evans Auto ~~~~~ Crawford Smith Inc ~~~~~ Byers Tractor Barn byerstractorbarn.com ~~~~~ SLH Builders ~~~~~~~~~~~~
|
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Located in Chappel Hill, TX which is 70 miles NW of Houston. Specifics are:
Custom Made 1978 Mini Rod Pulling Tractor with:
2.3(2300) 4 cylinder Ford Engine---Block is bored 30 over---Block is Decked
50 thousandths---480 Solid Lift Cam---Trapper Keepers on the Rockers---Head
has been shaved 100 thousandths---Ported to the Maximum---Holley 390 four
barrel carburetor---Shaved Choke Towers---4 in 1 Intake Adaptor with a 1
inch spacer---4 Speed Transmission (Has been Shaved down 16 inches)---8.8
Ford read end---26x12x12 Dick Cepek Pulling Tires with aluminum wheels--Also
Set of 26x12x12 Turf Tires
Never entered in Competition. It was driven onto the hauler and delivered
from Kentucky to Texas. Buyer passed away shortly after delivery and widow
needs to sell it. Builder will be glad to answer any questions. Add'l
pictures available. Asking $6000. 979/830-0935----
rmcneil@broadwaves.net
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Cub Cadet parts for sale. 782 - frame, series II KT17(locked up), all body parts panels and hood, complete rear end(course spline) 482 - frame, all body parts and panels and hood, complete peerless transaxle(mod 342) 1450 - fenders, hood I will soon be parting out a Cub Cadet SGT 2082. I will place an ad on here, on craigslist, and list parts on eBay under texretvet. If you have any requests for parts from this tractor, email me. I will give you a better deal than the going rate on eBay, because I won't have to go through the trouble of listing it and shipping it. I have a couple of other hoods and things from some wide frame tractors. 214-399-0742 brandon-n-lisa@netzero.com ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
1100 cc yamaha 1/4 scale minirod tractor with reverse, very sharp, lots of
crafsmanship and hard work put into this machine 2150.00
10-12 hp blocks, cranks, propane heads 125.00
16 hp complete motor ready for stock alt.or use as is 300.00
john deere 318 with 2.5 dodge motor almost finished still has ax hydros.
1000.00
misc weights and weight bars
254-230-5230 254-826-4415 eddie
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
I have a dual carb set for superstock, or open
class. It consist of a lakota dual carb intake, 2 vogel prostock carbs( the
one's before the boat carbs). all linkage, is ready to bolt on and go. You
might need to make an adapter to bolt this to a kolher block. I am asking
500.00 and i will pay the shipping. You can e-mail me at
retlawt7@pwrtc.com or call me at 574-870-4514. Thanks
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
For Sale - cub cadet custom aluminum frame, dodge carrier, Canadian 2nd 3rd ring and pinion, top shaft and larger input shaft. 26x12x12 tires,1100 YAMAHA wiesco pistons, corrillo rods, under cut trans, msd ignition, points champion last two years. Too many things to list. $10,000 invested asking $6500. Can call at work Mon-Fri 8-5 central time 512-288-0458 or email hohmannaut@sbcglobal.net ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
• Lone Star Garden Tractor Pullers Association North Central Texas Best! |